If you've managed to drip tyre sealant over your floor, your clothes or even your trusty steed, you need Ultimate Sealant Remover. This patented formula acts to effectively dissolve the molecular bonds between latex sealant and the surface or garment that it's fallen onto.
All you need to do is test first in an inconspicuous area of your clothes or kit, then wet the area if applying to a hard surface only. Spray the Ultimate Sealant Remover liberally over the affected area, wipe off immediately with a clean white cloth for hard surfaces, or wait for three minutes if applying to clothing. Finally, agitate clothing with a stiff brush, such as a toothbrush, to dislodge that latex, or give the bike or floor a thorough wash to remove any excess remover. If needed, repeat as necessary.
This formula is water based and biodegradable, so it's kind to the environment and won't harm your bike's frame paint if used as directed. It's an invaluable tool for helping salvage your precious belongings after a messy sealant job.
Key features:
- The newest component of the Silca Bicycle Spa Collection
- Use within two hours of spillage where possible
- Reliably removes dried latex from surfaces and clothing
- Won't harm frame paint when used as instructed – see directions
- Water based
- Biodegradable
Product Information
Storage
Unused sealed sachets should be stored inside the box in a well-ventilated, dry place and protected from moisture, heat and direct sunlight. Can be stored for up to 3 years.
Size
Each sachet contains 30g powder.2 x 30g sachets per carton box.
Makes 2x litres of bike cleaner
100% plastic free packaging
Readily biodegradable ingredients
100% water free
Refill your old bottle and help reduce plastic waste
92% saving in packaging compared to 2 x 1L bike cleaner
100% environmentally friendly ingredients, including plant based raw materials
Supplied in a compostable sachet and printed with vegetable inks
FSC recycled card box containing 2 x sachets – that makes 2L of bike cleaner
Safe on all parts and surfaces including carbon fibre
Will not harm seals, cables, disc brake pads or rotors
Alkaline based and free from alcohol, CFCs, EDTA, solvents or acids
Vegan & vegetarian friendlyCruelty free, not tested on animals
Sachet Instructions
1. Grab your empty old bottle of Muc-Off. (You may need a pair of adjustable pliers to remove the trigger from the bottle). Or purchase our Bottle for Life.
2. Fill up to the shoulders of the bottle with 1 litre of lukewarm water for faster formula activation!
3. Carefully cut one corner of the sachet open along the diagonal cut lines.
4. You can carefully pour the sachet straight into the top of the bottle. Or using the box, fold the inside of the lid together using the printed lines as a guide and use this as a funnel to pour the powder into your bottle. (Please see our video for full instructions on this.
5. Screw your spray trigger back onto the top of the bottle. Ensure it’s tight!
6. Shake the bottle vigorously for 30-60 seconds to activate the formula. If you notice any undissolved powder simply keep shakin’ it!
7. Go clean that filthy bike!